Electronics

This thermistor uses the same sensor from Semitech as the one originally on the Prusa Mini for highly accurate readings. The sensor is a drop-in replacement for the Prusa Mini....

This kit consists of: Hotend Thermistor - for Prusa MK3.9(S) and MK4(S) Heater Cartridge - for Prusa MK3.9(S)/MK4(S)//XL

This heater cartridge is the same length as the original Prusa Mini cartridge and has bootlace ferrules to connect it to the screw terminal more reliably like the original cartridge. The heater...

The Panda Touch is a 5'' touchscreen developed for the P1 series of Bambu Lab printers. Features: Plug-and-play convenience. Enjoy hassle-free setup with a quick installation that does not void...

The Voron Leviathan V1.2 is collaboration between JNP and the team at LDO to create a controller board specific for the needs of Voron 3D printers. With the following features, this...

This heater cartridge is the same length as the original Prusa MK3(S)(+) cartridge and has bootlace ferrules to connect it to the screw terminal more reliably, like the original cartridge. The heater...

This kit has a spare 88W heater for a Rapido (Plus) 2 hotend from Phaetus. Additionally it comes with thermal grease and a mounting clamp. 

This is the spare temperature sensor for a Rapido Plus 2 hotend from Phaetus, it can also be used for the standard Rapido 2 hotend, but this does require changing...

This kit consists of: Hotend Thermistor - for Prusa XL Heater Cartridge - for Prusa MK4/XL

The sensor is a drop-in replacement for the Prusa MK4. The spring next to the cartridge makes the sensor more durable and prevents the cable from breaking.You can also get...

This thermistor uses the same sensor from Semitech as the one originally on the Prusa MK2/3(S)(+) for highly accurate readings. The sensor is a drop-in replacement for the Prusa Mini. The...

This fan is ideal as part cooling fan in the stealthburner toolhead. 

This fan is ideal to use as hotend cooling fan in the stealthburner toolhead. 

The wires on this heater are the same length as on the Prusa MK4/XL, and uses the same connector. The heater cartridge is a drop-in replacement for the Prusa MK4/XL. You...

This fan is ideal to use for a nevermore filter. 

This fan is used in the LDO V0.2 kit as part cooling fan. 

This fan is used in the LDO V0.2-S1 kits, as the mainboard cooling fan, but can of course also be used for other projects. 

This is a replacement for the 24V 72W heatercore on the Smart Orbiter V3.0. 

The sensor is a drop-in replacement for the Prusa XL. The spring next to the cartridge makes the sensor more durable and prevents the cable from breaking.You can also get...

This is a replacement for the 24V 72W heatercore on the Smart Orbiter V3.0. This hotend assembly is as shown on the images, including silicone sock, heatbreak and heatercore. 

This fan is used in the LDO V2.4 and Trident kits as the mainboard cooling fan. 

The BIQU Universal Turbo Kit consists of high-quality, high-performance components supplied by Wonsmart Motor, along with a controller adapter board and custom cables, to make your CPAP blower installation experience...

High-quality 25mm box fan with dual Japanese bearings Molex Micro-Fit 3.0 connector Hotend cooling fan mounts directly to the Mosquito® Hotend, Mosquito® Magnum, or Copperhead® with included hardware 24V version Rated...

This is a 15mm fan pipe used with the BIQU Turbo Kit. The pipe is 1.8m long. 

This is the spare temperature sensor for a Rapido 2/XG/neXt G hotends from Phaetus.

The popular TMC2209 is now available in the EZ form factor. These EZ drivers have a more robust connector and integrated heatsinks. The EZ2209 supports microstepping 1/265 microstepping, StealthChop, SpreadCycle, and...

The Octopus MAX EZ is one of the most powerful and feature-rich mainboards available, featuring 10 EZ stepper driver connectors, allowing you to connect up to 11 motors. The new EZ stepper...

This new BIGTREETECH mainboard features EZ stepper driver connectors. The new EZ stepper drivers are easier to install, more compact, and allow you to run higher voltages (for EZ5160), while...

Accurate from freeze-your-butt-off cold (-50°C) to instantly-boil-your-innards hot (500°C) Totally linear temperature response improves sensing accuracy across the range 15mm long. 3 mm diameter sensor cartridge  2m long bare leads...

The MBB CAN V2.0 is developbed by BIGTREETECH in collaboration with the ERCF team. It features 4 EZ driver sockets in a compact formfactor. You can find more information here:...

The BIGTREETECH SKR PICO is an ideal mainboard for your V0.1/V0.2 build. Besides that, the board is also very suitable for other DIY projects involving stepper motors, due to the...

The powerful TMC5160 is now available in the EZ form factor. These EZ drivers have a more robust connector and integrated heatsinks. The EZ5160 Pro supports microstepping 1/265 microstepping, StealthChop, SpreadCycle, and...

This motherboard is the ideal replacement for an Ender 3 or 5. It features silent TMC 2209 drivers, a 32-bit processor, and exactly the same form factor as the original Ender...

Pump more power into your 3D printer with a high power density 50W heater cartridge.  The Hardcore 321SS cartridge improves longevity and durability 22mm long Diameter sized to fit into...

The BIQU Eco Turbo Kit is a more affordable alternative to the universal turbo kit, and has a lower power draw (48W max). The downside compared to the Universal Turbo...

The K-Touch is a 5'' touchscreen controller for klipperized 3D printers. It's using the same hardware as the Panda touch (and can also be converted to a Panda touch with...

The Revo high flow hotside is the perfect upgrade to your revo hotend, to improve printspeeds. It comes with a 24V 60W heater, and 4 high flow nozzles.

The Kraken is one of the most advanced mainboards from BigTreeTech. Utilising 8x integrated TMC2160 drivers, it can control stepper motors with high voltages (up to 60V). This mainboard is...

Eliminates the need for high-temperature RTD's or having two separate thermistors to maintain accuracy at both the low and high end of the temperature spectrum These are simply the highest-performing...