Prusa Parts/Upgrades

The Silicone Sock-X is the next evolution of our line of silicone socks, with their main focus being on eXtra durable. The V2 socks are prone to tearing, but this...

Introducing the new Silicone Sock-X, specially tailored for the Nextruder Hotend on the Prusa MK4 and XL printers. Retaining a similar design to our socks for the Prusa Mini and MK3, and high heat resistance of up...

The Silicone Sock-X is the next evolution of our line of silicone socks, with their main focus being on eXtra durable. The V2 socks are prone to tearing, but this...

Do you want the easiest-to-use Prusa Mini? Then this is the perfect upgrade for you, no need to reach to the back of the printer to turn it on or...

This Bi-metal heatbreak solves heat creap issues caused by the standard heatbreak on the Prusa Mini. The heatbreak is made from copper and titanium, this allows it to heat up...

The printed parts can be bought in Prusa Orange and Jet Black PETG here:  --> FRONT VERSION MINI/FRONT VERSION MINI+ --> SIDE VERSION MINI/SIDE VERSION MINI+ Or you can print them yourself!...

Do you want the best linear bearings for your Prusa Mini (+), if so, you should get this kit and replace the current ones! While Prusa ships the MK3S+ with...

Do you want to start prints over Wi-Fi on your Prusa Mini? Then you should get this ESP-01S. You can easily install the ESP in your printer, and connect to...

If you want to print flexible materials, or just want to get the best performance possible out of your Prusa Mini, then this is a great upgrade to get. The...

This thermistor uses the same sensor from Semitech as the one originally on the Prusa Mini for highly accurate readings. The sensor is a drop-in replacement for the Prusa Mini....

This Nextruder Heaterblock is made from nickel-plated copper. With this heater block, your hotend heats up faster, and the maximum flow rate is slightly higher than it would be with an...

Do you need a replacement heater block for the Prusa Mini, and are you looking for a small upgrade? Or do you want to get the most out of your...

This heater cartridge is the same length as the original Prusa Mini cartridge and has bootlace ferrules to connect it to the screw terminal more reliably like the original cartridge. The heater...

This product consists of:  1x USB+Powerswitch Extension Printed Part (Front), Prusa Mini (+) The printed part needed for the UBS+Powerswitch Extension upgrade, Prusa Mini (+).  They are printed in PETG Prusa...

This kit consists of: Hotend Thermistor - for Prusa MK3.9(S) and MK4(S) Heater Cartridge - for Prusa MK3.9(S)/MK4(S)//XL

Do you want the easiest-to-use Prusa Mini? Then this is the perfect upgrade for you, no need to reach to the back of the printer to turn it on! If...

This Nextruder Heaterblock is an affordable, high-quality Prusa MK4/XL heaterblock alternative. 100% compatible with the original hotend, it can be quickly and easily installed to get you printing again quickly...

This product consists of:  1x USB+Powerswitch Extension Printed Part (Side), Prusa Mini (+) The printed part needed for the UBS+Powerswitch Extension upgrade, Prusa Mini (+).  They are printed in PETG Prusa...

These original Gates 2GT Belts are cut to size for the Prusa Mini (+). For most Mini's this would be a slight upgrade in terms of stiffness (but some already...

This product consists of:  1x USB+Powerswitch Backplate (Front), Prusa Mini (+) This backplate isn't required for the USB+Powerswitch upgrade, but it's nice to have everything enclosed. This print is for...

This product consists of:  1x USB+Powerswitch Backplate (Side), Prusa Mini (+) This backplate isn't required for the USB+Powerswitch upgrade, but it's nice to have everything enclosed. This print is for the...

This brass coupler is a drop-in replacement for the Prusa Mini (+). There are two brass compression olives, so you have a spare one.  Package contents: 2x Brass Compression Olive1x...

Do you want the absolute best bearings for the price? Then this MYT bearing kit is perfect for you. While being of similar quality as the MISUMI bearings, these bearings...

These original Gates 2GT Belts are cut to size for the Prusa MK4. They are the perfect replacement for the belts on the Prusa MK4. 

This is a standard heater block for the Prusa Mini (+), made from aluminium.  Package contents: 1x Aluminium Heater Block1x Screws to mount the heater and thermistor cartridge1x Silicone Sock-V2, For...

The sensor is a drop-in replacement for the Prusa MK4. The spring next to the cartridge makes the sensor more durable and prevents the cable from breaking.You can also get...

This kit consists of: Hotend Thermistor - for Prusa XL Heater Cartridge - for Prusa MK4/XL

This heater cartridge is the same length as the original Prusa MK3(S)(+) cartridge and has bootlace ferrules to connect it to the screw terminal more reliably, like the original cartridge. The heater...

This thermistor uses the same sensor from Semitech as the one originally on the Prusa MK2/3(S)(+) for highly accurate readings. The sensor is a drop-in replacement for the Prusa Mini. The...

This silicone carbide nozzle from Phaetus is a great nozzle for the Prusa MK4(S) and XL. The silicone carbide tip is extremely hard, and even the heatbreak has been improved...

These original Gates 2GT Belts are cut to size for the Prusa MK2/3(S)(+). They are the perfect replacement for the belts on the Prusa MK2/3(S)(+). 

It's time to unlock the full power of your Prusa Mini (+), with the ubiquitous Copperhead®. We've built a reputation for outfitting 3D printers with premium engineering-grade components that drastically improve...

The wires on this heater are the same length as on the Prusa MK4/XL, and uses the same connector. The heater cartridge is a drop-in replacement for the Prusa MK4/XL. You...

Do you want the absolute best bearings for the price? Then this MYT bearing kit is perfect for you. While being of similar quality as the MISUMI bearings, these bearings...

These original Gates 2GT Belts are cut to size for the Prusa XL. They are the perfect replacement for the belts on the Prusa XL. The X-, and Y-Axis belt...

These high-quality bearings are the perfect upgrade/replacement for your Prusa MK2/3(S)(+). This kit is available for the X- and Y-axis only, for the X-, Y- and Z-axis and for the...

The sensor is a drop-in replacement for the Prusa XL. The spring next to the cartridge makes the sensor more durable and prevents the cable from breaking.You can also get...

These high-quality 3D printing nozzles are designed specifically for use with Prusa’s latest extruder – Nextruder. Compatible with Prusa’s MK4 and XL 3D printers, they feature an all-metal filament guide...

These high-quality couplers are the ideal replacement for your Prusa Mini (+). Instead of using tools to remove the PTFE tube, you can easily push to release the tube, this...

These high-quality 3D printing nozzles are designed specifically for use with Prusa’s latest extruder – Nextruder. Compatible with Prusa’s MK4 and XL 3D printers, they feature an all-metal filament guide...

These high-quality 3D printing nozzles are designed specifically for use with Prusa’s latest extruder – Nextruder. Compatible with Prusa’s MK4 and XL 3D printers, they feature an all-metal filament guide...

This Copperhead® Heat Break is compatible with the Prusa Mini (+) Bimetallic Heat Break™ Rated to 450 °C Covers the gamut of printable thermoplastics Eliminates Heat Creep  Note: Slice Engineering®...

A great hotend for your Prusa Printer, this product bundles all you need to completely replace your hotend at a discounted price. Including a great E3D Brass High Flow nozzle,...

A great hotend for your Prusa Printer, this product bundles all you need to completely replace your hotend at a discounted price. Including a great E3D Brass High Flow nozzle,...

A great hotend for your Prusa Printer, this product bundles all you need to completely replace your hotend at a discounted price. Including an amazing E3D ObXidian High Flow nozzle,...

A great hotend for your Prusa Printer, this product bundles all you need to completely replace your hotend at a discounted price. Including an amazing E3D ObXidian High Flow nozzle,...

A great hotend for your Prusa Printer, this product bundles all you need to completely replace your hotend at a discounted price. Including a high quality Phaetus Silicone Carbide Nozzle,...

A great hotend for your Prusa Printer, this product bundles all you need to completely replace your hotend at a discounted price. Including a high quality Phaetus Silicone Carbide Nozzle,...

E3D Revo hotends are now split in two, hotsides and coldsides. This product contains the E3D Revo Prusa Mini coldside, and you can pick your preferred hotside to go with...

Upgrade your Prusa MK3 3D printer with Revo to unlock rapid, tool free nozzle changing. This Coldside kit includes a Revo ready drop-in replacement heatsink plus everything you need to...