Sort by:
Silicone Sock-X - for Prusa Mini(+)
€5,50 – €42,50
The Silicone Sock-X is the next evolution of our line of silicone socks, with their main focus being on eXtra durable. The V2 socks are prone to tearing, but this...
Silicone Sock-X - for Prusa MK4/XL
€5,50 – €42,50
Introducing the new Silicone Sock-X, specially tailored for the Nextruder Hotend on the Prusa MK4 and XL printers. Retaining a similar design to our socks for the Prusa Mini and MK3, and high heat resistance of up...
Silicone Sock-X - for Prusa MK2/3(S)(+)
€5,50 – €42,50
The Silicone Sock-X is the next evolution of our line of silicone socks, with their main focus being on eXtra durable. The V2 socks are prone to tearing, but this...
Bi-metal Heatbreak - for Prusa Mini (+)
€18,95
This Bi-metal heatbreak solves heat creap issues caused by the standard heatbreak on the Prusa Mini. The heatbreak is made from copper and titanium, this allows it to heat up...
4-Pack - Silicone Sock-X - for Revo Nozzle
€5,50
The new socks for Revo nozzles help keeping your nozzle clean, and lowering the convection heat from the nozzle to the printed part, slightly increasing the print quality. The socks...
Brass V6 Nozzle - Standard
€4,25 – €15,75
This nozzle is compatible with the Prusa Mini (+), MK2/3(S)(+) and printers with V6 (compatible) hotends.The diameter tolerances are very high, resulting in better prints than low-quality nozzles. Package contents: 1x...
Hotend Thermistor - for Prusa Mini (+)
This thermistor uses the same sensor from Semitech as the one originally on the Prusa Mini for highly accurate readings. The sensor is a drop-in replacement for the Prusa Mini....
Nextruder Heaterblock - Plated Copper - for Prusa MK4/XL
€14,95
This Nextruder Heaterblock is made from nickel-plated copper. With this heater block, your hotend heats up faster, and the maximum flow rate is slightly higher than it would be with an...
LDO Galileo 2 Extruder Kit - G2E for Voron
€49,95
The Galileo 2 G2E is a drop-in replacement for the Clockwork extruder that's used in the Voron Stealthburner. It features a planetary gearbox, with a 9:1 gear ratio. This kit includes...
Heater Block - Plated Copper - for Prusa Mini (+)
€15,75
Do you need a replacement heater block for the Prusa Mini, and are you looking for a small upgrade? Or do you want to get the most out of your...
Hotend Thermistor and Heater Bundle - for Prusa MK4
This kit consists of:
Hotend Thermistor - for Prusa MK4
Heater Cartridge - for Prusa MK4/XL
Brass V6 Nozzle - Sharp
€4,25
This nozzle is compatible with the Prusa Mini (+), MK2/3(S)(+) and other printers with V6 (compatible) hotends.The overall length is the same as a V6 nozzle, but the tip is a...
Hardened Steel V6 Nozzle - Standard
€13,25
This nozzle is compatible with the Prusa Mini (+), MK2/3(S)(+) and printers with V6 (compatible) hotends. Because this nozzle is made of hardened steel, it wears way less than standard...
Nextruder Heaterblock - Aluminium - for Prusa MK4/XL
€7,95
This Nextruder Heaterblock is an affordable, high-quality Prusa MK4/XL heaterblock alternative. 100% compatible with the original hotend, it can be quickly and easily installed to get you printing again quickly...
Silicone Sock-X - for Mosquito Hotend
€5,50 – €42,50
The Silicone Sock-X is the next evolution of our line of silicone socks, with their main focus being on eXtra durable. This new generation is made from a far superior material in a...
Phaetus Plated Copper V6/PS Nozzle - 0.4mm
€12,75
This V6/PS nozzle from Phaetus is made from a highly conductive and temperature-resistant material. This keeps the temperature in the nozzle stable and allows you to print materials at temperatures...
Titanium Heatbreak - for Prusa Mini (+)
€12,00
This Titanium heatbreak solves heat creap issues caused by the standard heatbreak on the Prusa Mini! Package contents: 1x Titanium Heatbreak, for Prusa Mini (+)1x Thermal Paste, 0.5g1x PTFE tube The installation guide...
Silicone Sock-X - for Copperhead Hotend
€5,50 – €42,50
The Silicone Sock-X is the next evolution of our line of silicone socks, with their main focus being on eXtra durable. This new generation is made from a far superior material in a...
Phaetus Plated Copper V6/PS Nozzle - 0.6mm
€12,75
This V6/PS nozzle from Phaetus is made from a highly conductive and temperature-resistant material. This keeps the temperature in the nozzle stable and allows you to print materials at temperatures...
Heater Block - Aluminium - for Prusa Mini (+)
€9,95
This is a standard heater block for the Prusa Mini (+), made from aluminium. Package contents: 1x Aluminium Heater Block1x Screws to mount the heater and thermistor cartridge1x Silicone Sock-V2, For...
Hotend Thermistor - for Prusa MK4
€10,50
The sensor is a drop-in replacement for the Prusa MK4. The spring next to the cartridge makes the sensor more durable and prevents the cable from breaking.You can also get...
Hotend Thermistor - for Prusa MK2/3(S)(+)
€6,50
This thermistor uses the same sensor from Semitech as the one originally on the Prusa MK2/3(S)(+) for highly accurate readings. The sensor is a drop-in replacement for the Prusa Mini. The...
Hotend Thermistor and Heater Bundle - for Prusa XL
This kit consists of:
Hotend Thermistor - for Prusa XL
Heater Cartridge - for Prusa MK4/XL
Slice Engineering Prusa Mini (+) Copperhead Hotend Upgrade Kit
€114,99
It's time to unlock the full power of your Prusa Mini (+), with the ubiquitous Copperhead®. We've built a reputation for outfitting 3D printers with premium engineering-grade components that drastically improve...
Silicone Sock-X - for Bambu Lab Hotend
€5,50 – €42,50
Silicone Sock-X is now available for the Bambu Lab Hotend. Made from durable silicone, with high heat resistance of up to 300°C, the sock ensures a perfect fit and reliable protection...
LDO Smart Orbiter V3.0 - Extruder with Hotend
€112,50
The Smart Orbiter V3.0, is one of the most compact, lightweight, direct drive extruder solutions on the market. This smart extruder features all of the following: Copper heater block with...
Phaetus Rapido Plus 2 Temperature Sensor - PT1000
€14,95
This is the spare temperature sensor for a Rapido Plus 2 hotend from Phaetus, it can also be used for the standard Rapido 2 hotend, but this does require changing...
Phaetus Plated Copper V6/PS Nozzle - 0.25mm
€12,75
This V6/PS nozzle from Phaetus is made from a highly conductive and temperature-resistant material. This keeps the temperature in the nozzle stable and allows you to print materials at temperatures...
Phaetus Conch Plus Hotend for Bambu Lab X1/P1 Series
€43,50
The Conch Plus Hotend for the Bambu Lab X1/P1 Series printers, is a very durable high flow hotend. It combines a super hard Silicone carbide nozzle, with a heat break...
Phaetus Prusa Nozzle for Nextruder - Silicone Carbide
€24,75
This silicone carbide nozzle from Phaetus is a great nozzle for the Prusa MK4(S) and XL. The silicone carbide tip is extremely hard, and even the heatbreak has been improved...
Slice Engineering GammaMaster® V6 Nozzle
€29,95
The GammaMaster® Nozzle is the next evolution in nozzle technology, forged from the latest advancements in metallurgy and surface preparation technology. For too long, you have had to settle for...
LDO Orbitool 3 Toolboard Kit - for Smart Orbiter V3.0
€59,50
This Orbitool toolboard is the perfect toolboard for your Smart Orbiter. It's full of smart features, has a stepper motor driver (TMC2209) for your extruder and utilizes USB communication. Features...
Hotend Thermistor - for Prusa XL
€10,50
The sensor is a drop-in replacement for the Prusa XL. The spring next to the cartridge makes the sensor more durable and prevents the cable from breaking.You can also get...
Phaetus Dragon Hotend UHF - Phaetus
€97,50
The Dragon Hotend UHF is made with a focus on high-speed printing. You can easily change the nozzle, without having to hold a heaterblock. It's easy to mount with the E3D...
LDO Heatercore for Smart Orbiter V3.0
€29,50
This is a replacement for the 24V 72W heatercore on the Smart Orbiter V3.0.
Silicone Sock-X - for E3D V6 Hotend
€5,50 – €42,50
Introducing the new Silicone Sock-X, specially tailored for the E3D V6 Hotend. With a similar design to the MK2/3(S)(+), and high heat resistance of up to 300°C, the sock ensures a perfect fit...
Slice Engineering Vanadium™ V6 Nozzle
€29,99 – €37,50
Hard to the Core - Slice Engineering's Vanadium Nozzles are hardened and tempered to 65 Rockwell C all the way through the substrate, not just on the surface. Crafted from...
LDO Heatbreak for Smart Orbiter V3.0
€14,50
This is a replacement heatbreak for the Smart Orbiter V3.0.
E3D Revo High Flow Nozzle Brass
€49,95
The High Flow Revo Nozzles from E3D are ideal for fast printing, or using larger nozzles.
Phaetus Plated Copper V6/PS Nozzle - 0.8mm
€12,75
This V6/PS nozzle from Phaetus is made from a highly conductive and temperature-resistant material. This keeps the temperature in the nozzle stable and allows you to print materials at temperatures...
Phaetus Rapido HF Hotend - Black
The Rapido hotend is made with a focus on high-speed printing and convenience. You can easily change the nozzle, without having to hold a heaterblock. It heats up evenly because of...
Phaetus Conch Hotend for Bambu Lab X1/P1 Series
€26,75
The Conch Hotend for the Bambu Lab X1/P1 Series printers, is a durable high flow hotend. It combines a hardened steel nozzle, with EndCoat protection.
LDO Orbitool 2 Toolboard Kit - for Orbiter V2.0
€58,50
This Orbitool toolboard is the perfect toolboard for your Orbiter V2.0. It's full of smart features, has a stepper motor driver (TMC2209) for your extruder, and utilizes USB communication. Features...
Phaetus Rapido Plus UHF Hotend 2 - Black
€119,95
The Rapido Plus hotend is made with focus on high-speed printing and convenience. You can easily change the nozzle, without having to hold a heaterblock. This new Rapido Plus 2...
Slice Engineering BridgeMaster® V6 Nozzle - 0.4mm
Achieve peak bridging performance with the BridgeMaster® Nozzle! The increased thermal conductivity of our copper alloy, carries heat efficiently all the way to the nozzle tip, enabling you to maximize part cooling, without...
Phaetus Rapido UHF Hotend - Black
The Rapido hotend is made with focus on high-speed printing and convenience. You can easily change the nozzle, without having to hold a heaterblock. It heats up evenly because of...
LDO Orbiter Extruder V2.0
€65,50
The Orbiter Extruder V2.0 is a high-precision direct drive extruder, made by LDO Motors. It utilises precise bondtech gears, and had extreme low backlash for the best prints. You can use...
E3D Revo Nozzle Brass
€26,95
These are original Revo Nozzles from E3D, this is the standard flow version.
Phaetus Dragonfly Hotend BMS - Black
€59,95
The Dragonfly hotend by Phaetus is an all-metal hotend, with a nickel-plated copper heater block, and unique conical bi-metal heatbreak. Due to the copper heater block, it can be heated to...
Phaetus Silicone Carbide V6/PS Nozzle
€19,75
Every Material, No Compromise. From normal PLA to PEEK, even to Carbon Fiber reinforced materials, Silicon Carbide Nozzle could meet all the printing requirements of any material.
- Choosing a selection results in a full page refresh.